Home Categories Send inquiry

Single post ingroud lift L2800(A) equipped with bridge-type telescopic support arm

Product Introduction

Product Description

LUXMAIN double post inground lift is driven by electro-hydraulic. The main unit is completely hidden under the ground, and the supporting arm and power unit are on the ground. After the vehicle is lifted, the space at the bottom, at hand and above the vehicle is completely open, and the man-machine environment is good.This fully saves space, makes work more convenient and efficient, and the workshop environment is clean and safe. Suitable for vehicle mechanics.
The whole set of equipment is composed of three parts: main unit, supporting arm and electric control cabinet.
It adopts electro-hydraulic drive.
The out cover of the main machine is a Ø475mm spiral welded pipe, which is buried underground, and the foundation construction is convenient. The construction work surface only needs 1m*1m.
During non-working hours, the lifting post returns to the ground, and the supporting arm is on the ground, with a height of only 51mm. It can be used for non-lifting maintenance work or storage of other items. It is especially suitable for small repair shops and home garages.
Equipped with a bridge-type telescopic support arm to meet the needs of different wheelbase models and different lifting points.
The pull-out plates on both ends of the support arm reach 591mm in width, making it easy to get the car on the equipment. The pallet is equipped with an anti-dropping limit device, which is safer.
Equipped with electric control cabinet,24V operating voltage to ensure safe operation.
Equipped with mechanical and hydraulic safety devices,safe and stable. When the equipment rises to the set height, the mechanical lock is automatically locked, and personnel can safely perform maintenance operations. The hydraulic throttling device, within the maximum lifting weight set by the equipment, not only guarantees a faster ascent speed, but also ensures that the lift slowly descends in the event of mechanical lock failure, oil pipe bursting and other extreme conditions to avoid sudden rapid speed fall causing a safety accident.

Technical Parameters

Lifting capacity 3500kg
Load sharing max. 6:4 in or against drive-on direction
Max. Lifting height 1850mm
Raising/Lowering Time  40/60sec
Supply voltage AC220/380V/50 Hz(Accept customization)
Power 2.2Kw
The pressure of the air source 0.6-0.8MPa
Post diameter 195mm
Post thickness 15mm
N.W.  893kg
Capacity of oil tank 8L


  • Single post ingroud lift L2800(A) equipped with bridge-type telescopic support arm Related Video: